500mm (20-inch) Integrating Sphere
The CO-500 is an interior access sphere used to test light sources up to approximately 450mm (18 inches) in length. It includes a center mount lamp holder, baffles, and ports for detectors and fiber output.
300mm (12-inch) Integrating Sphere
The CO-300 is the smallest interior access integrating sphere in the Cal-Optics product line. It allows the light source to be positioned inside the sphere to capture total flux. It includes output ports for a detector and optical fiber output. It also includes a center mount lamp holder and appropriate baffles.
The CO-1000 is an interior access integrating sphere that is an ideal choice for measuring a wide range of light sources from smaller DC lamps to medium-sized fluorescent lamps. It includes a center mount lamp holder, baffles, and ports for detector and fiber outputs.
150mm (6-inch) Integrating Sphere
The CO-150 is a small integrating sphere used to capture the optical energy of light sources. It includes three ports. One for the input of the light source, one for a detector, and a third for a fiber to channel the signal to a spectrometer or other instrument.
1000mm (40-inch) Integrating Sphere
1500mm (60-inch) Integrating Sphere
The CO-1500 is similar to the CO-1000, but is able to measure light sources up to 1300mm (51 inches) in length. It is ideal for fluorescent lamps while still being able to measure a wide variety of smaller light sources. It includes a center mount lamp holder, baffles, and ports for detector and fiber outputs.
300mm (12-inch) Integrating Sphere for LEDs
The CO-300 LED is specifically dsigned for testing LEDs. It positions the LED die in the optimal position for accurate, repeatable, measurement based on the geometry of the sphere. It comes standard with 95% reflective coating and includes output ports for a detector, optical fiber, and temperature probe.